Bill Albright - How Many Cars Did He "Touch"
Comments
-
Well, he filled the crankhole on "Oliver", my 36 T coupe.:)0
-
My 53 Hornet Sedan in Hershey 15 years ago.0
-
I've got parts from Bill for my '42 Commodore coupe
Rick0 -
Bill provided several hard to find parts for my '51. He will be missed.0
-
Purchased my 52 Hornet from Bill in 07, finished restoration this year thanks to Bill's help, parts, encouragement andfriendship. We have lost a great mentor and friend.
Brent L.0 -
My '49 starter bolts are now "correct" because of Bill's generousity. And gee.. the emails we exchanged. He was one of those "unforgetable characters".0
-
We bought parts from Bill for our 1954 Hudson Hornet Hollywood and 1954 Hudson Hornet Special.
He will be missed. --Nell and Randy Owen0 -
My 51 Hornet Coupe had been fully restored by Bill in 1999 and he worked on my 48 Commodore0
-
Bill helped me with a part for the 51 Pacemaker, and I was sure to go back to him for more. I loved reading the posts from him too. You've all said it, so there's little I can add -- this community has lost a mainstay and a wonderful fellow.0
-
All three of my Hudsons have parts supplied by Bill:
1952 Hornet "Salt Flats Racer"
1939 Hudson Custom Roadster
1936 Hudson Eight "English Railton Custom"
More important is the loss of a good friend.0 -
Among many other things, a timing gear for my '40...which he gave me...:(0
-
Pity about Bill, HET lost a real good loyal member...When I lived in CA. about 11 years ago, I purchased my first 1951 Commodore sedan and use to drive up to Fontana and purchased many parts from Bill; throughout the years I would order parts for many of my other Hudson projects and ask Bill to bring to Laughlin, Nevada Hudson meet held the first weekend in November where I would pick them up, we all will miss him at this year meet.0
-
Bill restored my 53 coupe, Couldn't do it without his talent. We will miss him greatly. Rest in peace MY FRIEND.
Jose,Betty,Marissa
Perez family0 -
Various parts for my '46 Pickup0
-
My 52 Hornet.0
-
I got some Wasp trim from Bill,it was even autographed. J.R.0
-
Both of my cars--37 TErraplane--51 pacemaker--have parts AND sound advice from Bill , he is also the one who insisted I get in HET , asked me to him the fee and he had me signed up. A true legend in his time . BUD0
-
Parts for my 46 Coupe--both common and hard to find--he could always come through. A lot of advice, counsel and inspiration.
Bill Albright was a real stand-up guy.0 -
My 36 Terraplane benefitted from a very nice hood ornament he had, The 52 Hornet carries upper grill bars from Bill,
He picked my 49 Commadore out of his hat for the award in Pittsburg,
And Jeff's Doodlebug runs with a cam from Bill.
Not withstanding the friendship, helpfulness, and inspiration he gave us all, including the commitment go be at the national meets if he possibly could, even struggling with poor health.
I'm honored to have known him.0 -
Bill had his "hands" all over the 1954 Jet we own---It won the very first Bill Albright Award in Seattle. Bill is in ALL the many Hudsons that have passed this way--And will be in all the rest that pass through.
Short story--We had the pleasure of Bill's company at a couple of the Turlock Swap Meets. I was amazed at Bill's ability to "Sniff out" Hudson parts and paraphenalia in the various booths. He had the uncanny knack to see HUDSON parts that no one else did. I had visited one particular booth two or three times, Bill came back later with a really nice HUDSON Fire Chief toy that I had not seen. Yep, same seller I had visited a couple of times!!
Red and Tom Burke0 -
He touched our '50 Pacemaker with expert technical advice via the phone.0
-
He gave me lots of advice early on, sold me plenty of parts, and I was honored to be in the Albright corral in Reno in 2005. Doug Seals0
-
Bill sold me some parts for my '48 Super 6. Nice guy, and I intended to make it down there last year in person to meet him and look for more parts. Never put off 'til tomorrow what you can get done today!0
-
I first met Bill in the seventies when i went to his place with Jeff Pierce.He has
provided me with the parts I needed,if he hed them.On a road trip to bill's I left the owner of 47 hudson CP. Bill said if I was not in a hurry he would deliver it for the price of the fuel and breakfast.I awalways looked forward to
visiting at the San Diego swapmeet.He was a good guy and will be missed.
later Dave0 -
Bill was a good friend. Beside the 1954 Hornet coupe, there were many parts that I purchased from Bill.
The first time I meet Bill was at the Turlock Swap Meet in 1975. I was selling parts for Essex and other stuff. I did have a new stepdown cork clutch in its orginal box. Bill step up and ask the price. I said it is 20 bucks. But if you are a Hudson Club member then it's half off. Well Bill bought the clutch and we became great friends in the ensuing years. I located other cars for Bill and spoke many times on the phone about Hudson cars and parts needed or that were for sale. I will miss my good friend. I know that Jason will have to fill those shoes that Bill left behind, but I know that Jason will do an excellent job. So if any of you still need parts or a car, call Jason. You can count on him.
Remembering Bill forever.
Rich Smithen, Central California Chapter, past President.0 -
I bought my 1932 Greater eight from him sight unseen. We dealt over the phone and I have never regretted it for a minute. I only wish now that I had the oppurtunity to have met him0
This discussion has been closed.
Categories
- 37K All Categories
- 106 Hudson 1916 - 1929
- 19 Upcoming Events
- 91 Essex Super 6
- 28.6K HUDSON
- 561 "How To" - Skills, mechanical and other wise
- 993 Street Rods
- 150 American Motors
- 174 The Flathead Forum
- 49 Manuals, etc,.
- 78 Hudson 8
- 44 FORUM - Instructions and Tips on using the forum
- 2.8K CLASSIFIEDS
- 600 Vehicles
- 2.1K Parts & Pieces
- 77 Literature & Memorabilia
- Hudson 1916 - 1929 Yahoo Groups Archived Photos