OD tailshaft bearing

Park_W
Park_W Senior Contributor
edited November -1 in HUDSON
Someone have a good number for the overdrive tailshaft bearing - same from '41 to at least '51. I have MRC206S in my notes, but my NAPA never heard of it.

Comments

  • Clutchguy
    Clutchguy Senior Contributor
    Park,try mrc 3206 "s" is for a sheilded bearing. This doesn't have to be there.
  • Geoff
    Geoff Senior Contributor
    Parts book says ND3206. Should be a common bearing.

    Geoff.
  • mars55
    mars55 Senior Contributor
    Try a NAPA 6206J. It has the following specs.



    Bearing I.D. : 1.1811"

    Bearing O.D. : 2.4409"

    Bearing Width : .6299"
  • Park_W
    Park_W Senior Contributor
    Thanks, all ... it seems the 206 is what designates this basic bearing, with prefixes by supplier and suffixes to indicate variations (shielded or not, grooved or not, etc. So the NAPA counter person I spoke to last evening wasn't looking in the right place. I went there this morning and bought the 3206-J bearing ... exactly what I needed.
This discussion has been closed.

Categories

In this Discussion