roof stainless 53 super wasp

bartibog1
bartibog1 Expert Adviser
edited November -1 in HUDSON
i have misplaced the two short pieces of stainless that finish off the installation of the moulding that go between the rear window and the quarter windows they go over the top screws and are approx 1 1/2 inches in length. listed as part numbers 231830 and 831831 in parts book. does anyone have these 2 pieces for sale if so e mail me.

thanks steve

Comments

  • DocHornet
    DocHornet Expert Adviser
    bartibog1 wrote:
    i have misplaced the two short pieces of stainless that finish off the installation of the moulding that go between the rear window and the quarter windows they go over the top screws and are approx 1 1/2 inches in length. listed as part numbers 231830 and 831831 in parts book. does anyone have these 2 pieces for sale if so e mail me.
    thanks steve
    Steve... I bought a couple of pieces of roof trim for my '51, thinking I might be able to eventually upgrade to the '52-53 style. From the pictures I thought they were much larger pieces. This is a long shot, but maybe this is what you're looking for... I'd pass them along at my cost (or to anyone else who could use them) Here's a pic:

    http://www.2acresandamule.com/images/roof trim.jpg

    PS.. this is by no means an endorsement for Harbor Freight!
  • bartibog1
    bartibog1 Expert Adviser
    phil these pictures are not of 52 53 stainless and are of no value to me

    thanks for offer



    steve
  • [Deleted User]
    [Deleted User]
    Is this a 4 door car or a 2 door. Or does it not matter. I have a 4 door parts car. I can take a look tonight
  • bartibog1
    bartibog1 Expert Adviser
    its a 4 door 53 wasp super
  • [Deleted User]
    [Deleted User]
    Had problems with broken off bolts in the lower unit of my boat motor. Ate up most of the night. I will try again tomorrow.



    Tim
  • [Deleted User]
    [Deleted User]
    Is this what you are looking for?
This discussion has been closed.

Categories

In this Discussion