Finished door panels

dougson
dougson Senior Contributor
edited November -1 in HUDSON
Recently finished the door panels for my '54 Hornet coupe. I installed Boston@ speakers partly because the long '54 Hornet coupe trim strips are really hard to find. I was able to use sedan pieces, which are easier to locate, on the lower part. The speakers will be nice anyway.

Slowly getting there........:)






Comments

  • Chris Smith
    Chris Smith Expert Adviser
    Very nice, are they made in two or three pieces? Any pictures of the back side? I have the same car but dont think I have usable patterns.
  • Lee ODell
    Lee ODell Senior Contributor
    Very nice job. Good idea with the trim and speaker.

    Keep up the good work.
    Lee O'Dell
  • bent metal
    bent metal Senior Contributor
    Nice color combo, and I like the speaker covers too.
  • dougson
    dougson Senior Contributor
    Thanks for comments. The entire panel is constructed of 1/8" ABS plastic sheet. The inset was cut in the sheet. Extra pieces were cut and eopxy-glued to complete the insert. Check my garage on this site for more pictures.
This discussion has been closed.

Categories

In this Discussion