37 parts questions

Kdancy
Kdancy Senior Contributor
edited November -1 in HUDSON
Remember guys, this PU came to me in boxes and I am trying to figure it out --
What are these called and where can I get the rubbers? Seems like they go against the transmission or bellhousing to stabilize it.
I can not find the parts that the manual says is Transmission interlocking device.
Goes into the square peg area--

Comments

  • Kdancy
    Kdancy Senior Contributor
    surely some one has the answers?
    HELP !!!!
  • Jon B
    Jon B Administrator
    Regarding both things -- the interlock and the rubber "donuts" -- I would write or e-mail some of the "regular" Hudson vendors who advertise in the WTN, to see if they have them.

    The interlock parts could come from someone's "parts transmission", these were used for a few years so shouldn't be hard to come by. You will need one of the two brackets, because it looks like one of yours is broken.

    As to the donut, probably a used one will do, though you might find someone with NOS. And once again, there were used for several years so should be available. Try contacting the Hudson vendors.
  • Huddy42
    Huddy42 Senior Contributor
    Have some donut rubbers here in Australia if needed.
This discussion has been closed.

Categories

In this Discussion