restoration hudson 1949

2

Comments

  • RL Chilton
    RL Chilton Administrator, Member
    Pierre-

    Car looks beautiful! I love the color. Also, I forget, what model is your car?
  • 54SuperWasp
    54SuperWasp Expert Adviser
    RL Chilton wrote:
    Pierre-

    Car looks beautiful! I love the color. Also, I forget, what model is your car?

    If I remember well it is a 1949 Hudson Super Six. And I think Pierre will need the ( I'm not sure how we say that in english ) door sill plate? That stainless flat part that covers the top of the lower part of the body when you enter the car. And I think there is an Hudson script on it. Will write to him to be sure. Michel
  • VicTor Z
    VicTor Z Senior Contributor
    pierre from france wrote:
    [attachment:1]C:\fakepath\P1010521.JPG[/attachment]

    Hello

    or then I buy these parts for glass?

    It is for the front doors and Windows arrears

    thanks

    pierrot
    Hello Pierrot,
    Yes! I have what you need for your '49 Hudson Club Coupe. I have '54 Hudson Club Coupe, being worked on at Vintage Coach.
    The kit is $155.00 + Shipping and Handling (S&H). Mailing to Europe, there is a max length of 54” +/-. I now offer forming of the window channeling with stainless steel beading, the forming cost $40.00 + 155.00 = $195.00 (S&H). With the forming the shipping package will be less than 54”+/-.
    The kit includes: Division bars (between the Vent window and door window) 27” +/-, Run channeling for the doors 52”+/- and quarter windows 70”+/-, Belt Lines (Fuzzes, Whiskers, Etc.) inner and outer, doors 27”, quarter windows 27”.
    Vent windows and all weather-stripping contact K-Gap.
    VicTor Zamora
  • [Deleted User]
    [Deleted User]
    Hello

    Super Victor


    I sent a mail yesterday, this is exactly what need me

    Thanks

    Michel

    I have the new door sills
  • Lee ODell
    Lee ODell Senior Contributor
    Hi Pierre

    I sent you a message. Lee
  • mikeyb
    mikeyb Senior Contributor
    Hi Victor, did I get that right... you offer pre-formed window chanelling so we don't have to bend the material into the window curves? Or do I misunderstand something? Do you offer a kit for a 4 door stepdown?

    Mike
  • VicTor Z
    VicTor Z Senior Contributor
    YES! Sir! Mike I now offer Pre-formed window channeling for Hudsons and most other makes. The kit for a stepdown 4 door is $145.00 + $40.00 for the pre-formed.
    VicTor Z
  • VicTor Z
    VicTor Z Senior Contributor
    Hello Pierrot, the shipping to France is $80.00 :woohoo: . No charge for handling from me. VicTor (thez@verizon.net)
    VicTor Z wrote:
    pierre from france wrote:
    [attachment:1]C:\fakepath\P1010521.JPG[/attachment]

    Hello

    or then I buy these parts for glass?

    It is for the front doors and Windows arrears

    thanks

    pierrot
    Hello Pierrot,
    Yes! I have what you need for your '49 Hudson Club Coupe. I have '54 Hudson Club Coupe, being worked on at Vintage Coach.
    The kit is $155.00 + Shipping and Handling (S&H). Mailing to Europe, there is a max length of 54” +/-. I now offer forming of the window channeling with stainless steel beading, the forming cost $40.00 + 155.00 = $195.00 (S&H). With the forming the shipping package will be less than 54”+/-.
    The kit includes: Division bars (between the Vent window and door window) 27” +/-, Run channeling for the doors 52”+/- and quarter windows 70”+/-, Belt Lines (Fuzzes, Whiskers, Etc.) inner and outer, doors 27”, quarter windows 27”.
    Vent windows and all weather-stripping contact K-Gap.
    VicTor Zamora
  • VicTor Z
    VicTor Z Senior Contributor
    The shipping to Germany will be around $80.00 :whistle:
    VicTor Z wrote:
    YES! Sir! Mike I now offer Pre-formed window channeling for Hudsons and most other makes. The kit for a stepdown 4 door is $145.00 + $40.00 for the pre-formed.
    VicTor Z
  • bent metal
    bent metal Senior Contributor
    Looks great!

    More pictures, please.:)
  • [Deleted User]
    [Deleted User]
    Hello


    Here are a few photos suplementaires, reassembling a begins

    p1010570v.jpg

    p1010573z.jpg

    p1010572s.jpg

    p1010569n.jpg
  • [Deleted User]
    [Deleted User]
    Hello

    Hello


    can you tell me if there is a provider for mouldings?


    or can be find on occasion?

    thanks
    Pierrot
  • [Deleted User]
    [Deleted User]
    Hello

    Yesterday came the package of victor, my Christmas gift, lol

    p1010576m.jpg

    p1010578o.jpg
  • VicTor Z
    VicTor Z Senior Contributor
    edited December 2011
    Hi Pierre, how is the installation coming along?. Please let me know how much excess you needed trim on the channeling. Thanks for your business. Vic's Auto Window channeling.
  • VicTor Z
    VicTor Z Senior Contributor
    Hi Pierre, how is the installation coming along?. Please let me know how much excess you needed trim on the channeling. Thanks for your business. Vic's Auto Window channeling.
  • [Deleted User]
    [Deleted User]
    Hello

    can it find the coating under the table nine?

    p1010615f.jpg
  • hudsonsplasher1
    hudsonsplasher1 Senior Contributor
    Great looking paint job. I like the color!!
  • [Deleted User]
    [Deleted User]
    thanks hudsonsplasher
  • VicTor Z
    VicTor Z Senior Contributor
    ???????? :huh:
    pierre from france wrote:
    Hello

    can it find the coating under the table nine?

    p1010615f.jpg
  • 54SuperWasp
    54SuperWasp Expert Adviser
    pierre from france wrote:
    Hello

    can it find the coating under the table nine?

    p1010615f.jpg
    Bonjour Pierre, je crois qu'il faudrait reformuler la question en français et je pourrais la traduire car celle-ci est incompréhensible en anglais. Michel

    I'm asking Pierre to ask his question in french and I could translate it in english.
    Michel
  • [Deleted User]
    [Deleted User]
    edited January 2012
    AH sorry lol , michel en fait il s agit du revetement qui se trouve sous le tableau de bord, la cloison pare feu. le mien ci dessus est hors d'usage , je voulais savoir si on pouvait le trouver en neuf .
    Merci beaucoup Michel pour la traduction;)
  • 54SuperWasp
    54SuperWasp Expert Adviser
    pierre from france wrote:
    AH sorry lol , michel en fait il s agit du revetement qui se trouve sous le tableau de bord, la cloison pare feu. le mien ci dessus est hors d'usage , je voulais savoir si on pouvait le trouver en neuf .
    Merci beaucoup Michel pour la traduction;)
    Pierre says that this part is located under the dash, acts as a firewall and is no more good. Would like to know if he could find a new one.
    Hope it helps. Michel
  • 54SuperWasp
    54SuperWasp Expert Adviser
    I'm pitting this back-up for Pierre. I tried to translate what he was asking for. Just look my previous answer. Thnaks, Michel
  • [Deleted User]
    [Deleted User]
    Hello

    Someone has a picture of the fuel door, I do not understand how to place the springs? Thank you
  • onerare39
    onerare39 Expert Adviser, Member
    edited January 2012
    Pierre,

    This was a topic of discussion on October 31, 2011. Hope this helps.

    Gas Door Springs

    John Forkner
  • [Deleted User]
    [Deleted User]
    Hello

    today I began the renovation of the engine:woohoo:
  • [Deleted User]
    [Deleted User]
    Clutch cork still look prety good
    Roger
  • [Deleted User]
    [Deleted User]
    edited April 2012
    Hellowho can tell me or I can buy these pipes for the oil filter?

  • [Deleted User]
    [Deleted User]
    Probably on Ebay would be your best bet for new ones. I have some used ones but they would be about the same as what you have now
    Roger
  • [Deleted User]
    [Deleted User]
    You can get ones made up at a tractor supply house. Or I got mine made by the guys who relined my brake shoes. They make up all kinds of lines. If you find them NOS they are probably not good to use. Any hydraulic hose supply shop can make them.
This discussion has been closed.

Categories

In this Discussion