horn covers needed

Rocket
Rocket Senior Contributor
edited February 2013 in HUDSON
I am in need of two sets of horn covers for two sets of horns I have they need to fit (EA TONE D ) horns made by (E.A.LABORATORIES INC BROOKLYN NEW YORK U.S.A) also looking for trumpits for these horns can any one help me out or dose anyone know someone who spins brass that can help me thanks.

Comments

  • Jon B
    Jon B Administrator
    You might want to do a brief description of the horns -- diameter of the cover, diameter and length of trumpet, markings on them, etc. (You didn't mention the year of Hudson.) I feel certain that these parts may interchange with other years of Hudson, and possibly even other makes of car as well. There's a good chance that some of the Hudson parts vendors might have parts, or a complete horn with at least some of the parts you need, lying around.
  • Rocket
    Rocket Senior Contributor
    My hudson is a 1936 long wheel base the horn covers are 5 1/2 inches in diameter the trumpets are about 6 inches long with a grill in the end not a screen my horns are the same type that Dave Sollon has on his 1936 sedan delivery .
  • Jon B
    Jon B Administrator
    I assume you know of Cecil Nuxoll out in Washington (or is it Oregon) who re-makes these old horns for various old cars? Possibly he could supply just the missing parts instead of a complete unit.
  • Rocket
    Rocket Senior Contributor
    I have all ready talk to his son tom and also another person who dose horns in rome new york they did not have at all and told me to try here.
  • Jon B
    Jon B Administrator
    Have you tried writing, calling or e-mailing the normal Hudson vendors who advertise in the WTN? Y'know, just send out a sort of "mass mailing" with a sketch of what you're looking for? These guys manage to accumulate an awful lot of Hudson parts over the decades. And they don't necessarily hang out here (or anywhere on the internet).
  • dave s
    dave s Senior Contributor, Moderator
    I have some extra horn parts that are in need of plating. I will not be able to get to them until mid-March. If you are still in need at that time, get in touch wth me and I will see if I can help out.
  • Rocket
    Rocket Senior Contributor
    Dave I sent you a pm I hope it goes through Tom.
This discussion has been closed.

Categories

In this Discussion