308 carbs rebuild or have them rebuilt?
Hey guys, haven't been around for awhile life can be like that sometimes. Anyway I am in need of either having my carbs rebuilt or rebuilding them myself. If I decide to do it myself where can I find the kits? Is it any harder than a standard 4 barrel? If I have them rebuilt what can I expect to spend? I hooked up with a local rebuilder, sent him all my info and never heard back. I suppose he couldn't get the parts either. The car runs and drives so they aren't completely toasted but they do leak fuel and it runs a little rough at times like they are loading up.
Anyway thanks for any info you can give.
Anyway thanks for any info you can give.
0
Comments
-
We have kits at 21st
centuryhudson.net
Randy
0 -
I suppose one answer would be would you be comfortable doing the job yourself. I've done a few way, way back - don't know if I did it right, but the car ran ok afterward. As Randy says kits are available. You didn't mention a carby number - there are Carter carburetor sheets in the online library - url below.
If you don't feel comfortable doing it then I'd recommend Walt Mordenti - he's always rebuilding carbs - but I don't know what he charges.
Hudsonly,
Alex Burr
Memphis, TN0 -
I've done some in the past and like you they ran afterwards. I will get and post the info on the carbs this afternoon.0
-
Get the appropriate Hudson manual for your unit before you start. There is info there not in the paperwork that comes in the kits. And if you have a way to soak out and clean the passages go ahead and try. Whats the worst that can happen ? - you have to have some one else redo it ?
Roger0 -
I just had my twin H carbs rebuilt at Daytona Parts Co. in New Smyrna Beach Fla. Google them and read about them. I was referred to them by Dr. Doug.They did a great job. About $500.00 for both. I payed twice that a couple years ago from Walt. His were not even close to these. I highly recommend these folks.
paul0 -
Thanks for the review Special, I was reading about them and am glad to hear from someone else who has used them0
-
i also have had them rebuild 4 of the carbs,they look and perform better than new!!!0
-
Daytona did a set for me also.
0 -
HORNETSPECIAL, this is Walt, show me the bill where you said I charged you twice that amount.0
-
walt does,nt seem like a warm happy fellow. oh my.0
-
As far as carbs go, these are not that complicated. My local shop does them and their carb guy was not yet born when cars quit using these carbs....0
-
Walt sorry if i miss spoke about price. Did not save bill, but as I recall it was far more than i paid at Daytona. Also they look almost new and yours did not. Sorry if i have offended you. You are up there on your prices.0
-
Another guy promoting a company. My charge is $490.00 for 2 carbs and that includes the kits. And they are new when finished. It's been that way since day one. Walt.0
-
Walt, if you have them, what would you want for a pair with no core?0
-
hotrodman, e-mail me at hetwaltmordenti@aol.com Drop the het, have to fool the spam computer. Walt0
-
Walt, I want to order your books, can you send me your address and contact info please.
Harry0 -
Harry,
Walt's address is on page eight of the January/February 2013 edition of the White Triangle News!
John Forkner0 -
Walt Mordenti 45 Skyview Way San Francisco, CA 94131-1248 The 2 books are $41.00 and that includes S&H priority mail.0
This discussion has been closed.
Categories
- 36.9K All Categories
- 103 Hudson 1916 - 1929
- 19 Upcoming Events
- 91 Essex Super 6
- 28.6K HUDSON
- 559 "How To" - Skills, mechanical and other wise
- 993 Street Rods
- 150 American Motors
- 172 The Flathead Forum
- 49 Manuals, etc,.
- 78 Hudson 8
- 44 FORUM - Instructions and Tips on using the forum
- 2.8K CLASSIFIEDS
- 599 Vehicles
- 2.1K Parts & Pieces
- 77 Literature & Memorabilia
- Hudson 1916 - 1929 Yahoo Groups Archived Photos