Twin H in a Pacemaker

faustmb · September 2006

I am planning to put Twin H into my 50 Pacemaker. I have the intake, carbs, and filters, but no linkage or mounting brackets.

I'm looking for advice and /or photos of the linkage, mounting brackets etc.

Any information would be greatly appreciated,

Matt

Unknown · September 2006

I believe Bill Albright has mentioned he has several sets. Also, If you find the main long rod that mounts to the head, the rest can be made easy enough.

Aaron D. IL · September 2006

Are you planning on putting the Twin H on a 232 ?

[Deleted User] · September 2006

Matt:

I have some information on my website.

Linkage picture from Parts book is here:

http://members.aol.com/stepdown53/images/TwinHlinkage.jpeg

Actual linkage picture:

http://members.aol.com/sanjuana/Images/TwinHLinkage.jpg

How to adjust the carbs bulletin here:

http://members.aol.com/stepdown53/TWINHADJUSTMENT10001.htm

How to Balance the carbs using a UNISYNC

http://members.aol.com/sanjuana/Incoming/UniSync.pdf

Picture of a Twin H maniford and carbs off car

http://members.aol.com/sanjuana/Images/TWINH.jpg

Pictures of Large Paul's Baby installation of a Hornet equipped with Twin H. The pictures show how Paul modified the rear aircleaner to allow the vacume wiper motor clearance. Great job... also pictures of installed and not installed components.

Good Luck Matt...

faustmb · September 2006

Aaron D. IL wrote:

Are you planning on putting the Twin H on a 232 ?

Acutally... yes, for now. The 232 runs strong overall. I have a 54 308 but it needs a total rebuild. Eventually, I plan to install it.

Ken,

Thanks for the info. I will check it out ASAP,

Matt

Aaron D. IL · September 2006

Well I put a double barrel from intake and carb from the bigger Hudson engines and it did give the 232 a lot more pep....however I think one thing that would've helped in my experience with increasing the breathing is also increasing the exhaust. It tended to run a little rougher. I don't know what the 232 will do with a twin H on it though

Unknown · September 2006

Putting a 308 Twin H set up on a stock 232 will work, but you will find that it will run fat or rich. It will look good but your driveability may suffer, but eye candy is cool!

Twin H in a Pacemaker

Comments

Categories

In this Discussion