39 to 40 bumper interchange

Unknown
Unknown
edited November -1 in HUDSON
Does anyone know if the front bumper on a 39 112 will interchange with a 40 Super Six or Six Deluxe ? It appears from my Butler book that they are very similar but that the bumper guards align differently.

Comments

  • Uncle Josh
    Uncle Josh Senior Contributor
    Well, if I knew whether the 39 112 and Country clubs were the same, I could help ya, since I have a 39CC and a 40 Victoria in the woods.
  • [Deleted User]
    [Deleted User]
    The distance between the 2 holes on the bumper for the bumper brackets (which are bolted to the frame) is 13.5" C-C. The distance between the inner bolt holes on the bumper itself is 26.75" C-C. Hope this info helps.



    Kevin
  • Unknown
    Unknown
    My measurements of the bumper on my 40 show a length of 5'8" tip to tip following the outer contour of the bumper. It is 4.5" in width. The outer bolt hole is 6.5" from the tip (end) and the hole with the bumper guard is 18" from the tip. Looking at Butler's book it appears that the 39 Country Club has either a recessed area for the license plate or a license plate bracket that is bolted to the bumper. Mine has neither.
This discussion has been closed.

Categories

In this Discussion