is it a 308?

[Deleted User]
[Deleted User]
edited November -1 in HUDSON
hey guys wanted to see if you could id this block, i thought the 308 had a rib on the gen side ,this engine had a 262 head installed with the 2-h after the fact.any help? thanks for looking

Comments

  • [Deleted User]
    [Deleted User]
    It's a 308 with a 262 head. The rib is readily identifiable as you look under the generator and go straight back to the rear of the driver's side of the block.
  • [Deleted User]
    [Deleted User]
    66patrick66 wrote:
    It's a 308 with a 262 head. The rib is readily identifiable as you look under the generator and go straight back to the rear of the driver's side of the block.



    thank you ,i thought that the rib was to be partial and up higher, but i thank you very much for the info.

    now all i have to do is identify the year...lol
  • nick s
    nick s Senior Contributor
    its a 55 or 56 308
  • [Deleted User]
    [Deleted User]
    nick s wrote:
    its a 55 or 56 308



    hmm, ok thank you. i guess that would mean that we have hyd lifters and relieved valves, should be a ok combination from what i hear.any input on that?
  • Unknown
    Unknown
    Hey, that looks very much like the 1950 Super Six from M.Rosauer which was on craiglist the other day. Again a lost chance for me ;-)
  • PAULARGETYPE
    PAULARGETYPE Senior Contributor
    Well Only Allthe 56's Had Hyd. Lifters Some 55's Were Solids
  • [Deleted User]
    [Deleted User]
    Yes i bought it from Mark the other day.
  • [Deleted User]
    [Deleted User]
    gearhead wrote:
    Yes i bought it from Mark the other day.



    i have been looking for a good driver since my 52 coupe isnt done yet
  • Unknown
    Unknown
    I received some pics and a discription from Mark. Is the body really solid (except on hole) ?

    I also thought it may be a good driver. Wish you good luck with it.
  • [Deleted User]
    [Deleted User]
    Enfield wrote:
    I received some pics and a discription from Mark. Is the body really solid (except on hole) ?

    I also thought it may be a good driver. Wish you good luck with it.



    the body is awsume,needs a good block and buff as far as the paint goes,im going thru all the brakes and such. the chrome was all done a few years ago. it does run great with exception of poor idle,but i will take care of that. any way thankyou
This discussion has been closed.

Categories

In this Discussion