1937 Hudson Front Fender Trim

Browniepetersen
Browniepetersen Senior Contributor
edited November -1 in HUDSON
I need one of these. It is from the front fender of my 1937 Hudson Sedan. Anyone out there have one? browniepetersen@readytek.net

Comments

  • Unknown
    Unknown
    I Made some of those a few years ago, I'll go tpo my storage space and see if I have the mold I could easily make them. (they would be in bronze and need to be plated)

    ironman
  • Unknown
    Unknown
    Might want to post some costs if your interested in running a batch, I've heard several at shows asking about these
  • Unknown
    Unknown
    Hello Ironman. I will buy four of them, if you do make them. Mike Cherry, at fairmontw@fiber.net

    thanks,

    Mike
  • Jon B
    Jon B Administrator
    I believe a flat version of this was used on the '37 Hudson trunk, and on the 1937 Hudson and Terraplane radio receiver enclosures (which was weird; the radios were located under the dash, and concealed!). So if one of those flat ones could be found, they might be bent to fit....
  • Unknown
    Unknown
    I Have Reproduced The Flat Emblems In Brass And Chrome Plated. The Ones On The Radios Were About 2/3rds The Size Of The Regular Trunk And Skirt Embllems. I Do Have One Or Two Nice Ones That Are Curved For The Fenders, Bill Albright
  • Browniepetersen
    Browniepetersen Senior Contributor
    The emblem on the back of my 37 car is quite a bit larger than the one that I placed in the thread. By the way, you guys are great. I love the way that everyone is so helpful in providing information and the parts that you have available. Just goes to show how great Hudson folks are.

    Brownie:):):)
This discussion has been closed.

Categories

In this Discussion