Replacing window tracks in my '41

edhamlin
edhamlin Senior Contributor
edited November -1 in HUDSON
I need to replace the window tracks on all four windows in my '41 4-door Traveler. Is there a list of part numbers and a source for these parts easily available? I need everything; the windows are just riding in the door frame right now (and the rattles and leaks are something to behold!).

Comments

  • Ol racer
    Ol racer Senior Contributor
    I feel this Person will be able to assist with your problem. Vic's Auto Channeling in Ca. @ 562 947 5864
  • edhamlin
    edhamlin Senior Contributor
    Thanks, I'll give them a shout.
  • VicTor Z
    VicTor Z Senior Contributor
    Thanks Ol racer, Ed yes I have the Channeling for your '41 four door traveler. the kit comes with window channeling and Belt Lines (Wiskers) for all doors. Also the division bars, between the front door window and the vent window ( Not sure if traveler has vent windows), and belt Lines for the Quarter Windows ( that's if the 1/4 windows slide) $150.00 + Shipping and Handling. Less if it doesn't have vent and the 1/4 windows don't slide.

    VicTor Zamora (562) 947-5864 voice mail.
  • edhamlin
    edhamlin Senior Contributor
    Thanks Victor. Please see my private message.



    Ed
  • Hi Ed.---How is the glass in your 41? I have 3 new pieces thast originally were mistakes for width when I restored my 41 long wheelbase. If you are interested in them, kindly measure the width of the glass in your car & let me know. Hudsonly---Cliff Minard.
  • dustymaxhudson
    dustymaxhudson Expert Adviser
    VicTor Z wrote:
    Thanks Ol racer, Ed yes I have the Channeling for your '41 four door traveler. the kit comes with window channeling and Belt Lines (Wiskers) for all doors. Also the division bars, between the front door window and the vent window ( Not sure if traveler has vent windows), and belt Lines for the Quarter Windows ( that's if the 1/4 windows slide) $150.00 + Shipping and Handling. Less if it doesn't have vent and the 1/4 windows don't slide.

    VicTor Zamora (562) 947-5864 voice mail.



    Vic, Do you sell a kit for the 34 Terraplane Coupe? I don't have vent windows.
  • VicTor Z
    VicTor Z Senior Contributor
    Hello Dusty, I have the "U" channeling (RUN) for your '34 coupe, They come with stainless beading and with out, 8 ft., $31.00 each. I don't have the belt lines for the '34, check with K-Gap. Thank You ! VicTor Z
  • edhamlin
    edhamlin Senior Contributor
    Hi Cliff,



    My glass is not very good (except for the rear quarters, which are new), so I will take measurements and send them to you. However, there is a slight problem: I am 3,000 miles from my Huddy until Dec 12, so I will have to do it when I get back home.



    Thanks

    Ed
This discussion has been closed.