Hudson 308 header flanges

[Deleted User]
[Deleted User]
edited November -1 in Street Rods
Anyone know of a source for 308 header flanges?

Comments

  • bent metal
    bent metal Senior Contributor
    K-Gap has them.
  • segajeep
    segajeep Senior Contributor
    Where? I didn't see an engine section.
  • [Deleted User]
    [Deleted User]
    I e-mailed KGAP and they said try Clifford Performance. I know someone sold them on Ebay at one time but I can't find the contact information.
  • Lee ODell
    Lee ODell Senior Contributor
    Until K-Gap comes out with a new updated catalog not everything they have or make is listed in the curent catalog. I didn't know they had header flanges either. Another item not listed in the catalog is a very good adapter to mate Hudson engines to GM automatic transmissions.

    So it is worth a call to see if they have what you need.

    Have a good day.
    Lee O'Dell
  • segajeep
    segajeep Senior Contributor
    I 'm looking for some equal length headers, to really get an advantage over the stock setup. I'm also weighing the differences between the GM trans adapters. I'd like to run am M-20 or an M-22.
  • bent metal
    bent metal Senior Contributor
    edited October 2011
    K-Gap does have the header flanges, and the transition piece of tube that takes the square hole to round. Ask for "Dany" when you call, he'll know.

    There is also a guy who sells headers with equal length tubing at San Simeon every year. Bruce Silva. They are really nice. And you can get them already coated with Jet Hot, or comparable coating. ...That's if he still has them.:)
  • [Deleted User]
    [Deleted User]
    I will call K-gap tomorrow and ask to speak to Dany. I was at work and just sent an e-mail so maybe his wife answered and didn't know about the flanges. I called Bruce Silva and he said the headers are not available anymore. He is checking to see if he can get me a set of the flanges. His headers did look real good.

    David
  • HUDSONBROTHER1
    HUDSONBROTHER1 Expert Adviser
    Mark Sanders had header flenges advertised on Ebay for stude V -8's.I sent him an email at maleko.hi50@gmail.com about Hudson big six header flanges.He replied back said he also makes them.He gave me a price of 38.00.Stubs were 3.00 each.I have not tried his flanges yet,so I don't know about the quality.He is in Elcajon,Ca.I hope this helps.Later Dave
  • hudshornet
    hudshornet Expert Adviser
    Did anyone have any luck locating flanges?
This discussion has been closed.

Categories

In this Discussion