Resto-mod....power brakes needed?

airbrushguy
airbrushguy Member
in Street Rods
Working on a '49 Hudson/Cadillac 500 project with a Fatman frontend. It has front disc brakes and a very limited area for brake pedal/master cylinder and I am wondering how necessary power brakes are with this setup. The Caddy engine is pretty much stock and will not be driven hard, mostly cruising and long trips.
Has anyone done this and used non-power brakes?
Thanks

Comments

  • Ol racer
    Ol racer Senior Contributor
    There are Suppliers that sell under floor dual power M/Cyl's.. You will need Power Brakes and now is the time to do it. I installed a small '04 Chevy Cavalier Booster & Swing pedal on a '51....
  • RichardD
    RichardD Member
    edited February 2020
    My installation is still perfect and stops on a 'dime' !!!  Shoulder belts REQUIRED ~~~~
    https://goo.gl/photos/QEtE7t64Ebs53teC8
  • fliptop
    fliptop Member
    I used a Dual Bail Style Master Cylinder (DMBC09) and combination Value (PVK71) attached to a 7" Delco style booster.



  • 54coupe
    54coupe Member
    I will be using a booster and bracket from 66-77 Bronco in my 54. You will definitely want power brakes.
  • Fred_Pitz
    Fred_Pitz Member
    I'm still in the planning stage on my 51 Commodore coupe, but intend to use a remote Hydro-Boost unit activated by the original master cylinder and probably mounted in the trunk.
  • airbrushguy
    airbrushguy Member
    I eventually put MC and power booster under floor, worked fine and less clutter around engine.
  • TwinSupercharged
    TwinSupercharged Expert Adviser
    airbrushguy, I have 1951 Hornet. ABS disc up front, Ford drums out back. No power. Stock Hudson pedal. I used Matt Faust dual MC mounting bracket under the floor with a 1972 Corvette MC  (for disc and drums), used line pressure vales, 10 PSI on back line and 2 PSI on front line. The stock pedal is 6.5 to one ratio along with the Vet MC no power is needed. Puts you through the windshield.    
  • airbrushguy
    airbrushguy Member
    TwinSupercharged said:
    airbrushguy, I have 1951 Hornet. ABS disc up front, Ford drums out back. No power. Stock Hudson pedal. I used Matt Faust dual MC mounting bracket under the floor with a 1972 Corvette MC  (for disc and drums), used line pressure vales, 10 PSI on back line and 2 PSI on front line. The stock pedal is 6.5 to one ratio along with the Vet MC no power is needed. Puts you through the windshield.    
    I was afraid the 500 Cadillac that I put in might need more help.

Categories

In this Discussion