Re: [HSS] Digest Number 1077

The reference to Jay Leno's favorite car being his HUDSON was on his Wednesday night show when "Boom- boom" the blow up stunt man asked him what his favorite car was. He hesitated and thought for a moment then said he liked his HUDSON. He didn't say what year it was.



HudsonSuperSix16-29@yahoogroups.com wrote:

>

> There are 4 messages in this issue.

>

> Topics in this digest:

>

> 1. 29 H Parts

> From: <hkhawk@bellsouth.net>

> 2. Re: 29 H Parts

> From: "Geoff Clark" <geoffclark@xtra.co.nz>

> 3. Re castings

> From: "Hudson Hire" <hudsonhire@cambridge.net.nz>

> 4. Jay Leno

> From: Bob Harris <bharriscar@prodigy.net>

>

> ________________________________________________________________________

> ________________________________________________________________________

>

> Message: 1

> Date: Thu, 4 Mar 2004 13:51:13 -0500

> From: <hkhawk@bellsouth.net>

> Subject: 29 H Parts

>

> I would like to buy two 29H vent rods finished at 85. each, I also want to buy two 29H

> window rollers in the pine cone pattern and four door handles in the pine cone pattern.

> Thanks. Let me know how to pay. Harold Hudson, 1115 Belledeer Dr. Tupelo, Miss.

> 38804

>

> ________________________________________________________________________

> ________________________________________________________________________

>

> Message: 2

> Date: Fri, 5 Mar 2004 09:20:31 +1300

> From: "Geoff Clark" <geoffclark@xtra.co.nz>

> Subject: Re: 29 H Parts

>

> Harold, I'll finish off the vent levers and send to you. I don't have any

> pine-cone window winder handles in stock at the moment, so will send the

> mold off and get them made for you. will . This will take some time, but

> don't panic, they will arrive. I have not made any pine-cone door handles,

> but can do so. I assume you want the interior handles? I'll let you know

> the cost of postage when I send the handles.

> Geoff.

> ----- Original Message -----

> From: <hkhawk@bellsouth.net>

> To: <HudsonSuperSix16-29@yahoogroups.com>

> Sent: Friday, March 05, 2004 7:51 AM

> Subject: [HSS] 29 H Parts

>

> > I would like to buy two 29H vent rods finished at 85. each, I also want to

> buy two 29H

> > window rollers in the pine cone pattern and four door handles in the pine

> cone pattern.

> > Thanks. Let me know how to pay. Harold Hudson, 1115 Belledeer Dr. Tupelo,

> Miss.

> > 38804

> >

> >

> >

> > Community email addresses:

> > Post message: HudsonSuperSix16-29@onelist.com

> > Subscribe: HudsonSuperSix16-29-subscribe@onelist.com

> > Unsubscribe: HudsonSuperSix16-29-unsubscribe@onelist.com

> > List owner: HudsonSuperSix16-29-owner@onelist.com

> >

> > Shortcut URL to this page:

> > http://www.onelist.com/community/HudsonSuperSix16-29

> > Yahoo! Groups Links

> >

> >

> >

> >

> >

>

> ________________________________________________________________________

> ________________________________________________________________________

>

> Message: 3

> Date: Fri, 5 Mar 2004 11:20:54 +1100

> From: "Hudson Hire" <hudsonhire@cambridge.net.nz>

> Subject: Re castings

>

> Sorry Brett, you were pipped at the post. However, I can get you a pair

> cast if you like. I don't actually have the mold myself, but I knew they

> were being done so i ordered some. They are the bigger version used in the

> Biddle& Smart models, look quite good actually. .. don't worry about it Goeff

> Mine are fine but I thought that I should just grab a spare pair while they're available,

> ...but if the cast ones aren'texactly the same as the ones I have, I'll don't think I'll bother.

>

> The window winders are around $50 each, unfinished, You can clean

> them up, fit the knobs, and get them plated yourself. Fine - I'll take two of these - unfinished

>

> ....Bicknell's Hudson, which is now almost complete. well done

> Will post a pic of it on the HSS page shortly. I'd appreciate you also posting these to my own email address as I still can't open pics posted to this group and I'd like to see them

>

> You don't have a spare pair of winder escutcheons I suppose? .... no Hudson ones but I do have a couple of Essex ones which you can have if you want (Incidentally my second Hudson was restored with all Essex hardware - and has ever noticed that's it's not correct - even when parked beside another Hudson)

>

> Or a vent screw shaft? -- Yes I do - complete with its correct knob, spring and mounting bracket

>

> Shall I post these goodies away to you - and does a straight swap (for the 2 window winders) sound fair?

>

> Brett

>

> [This message contained attachments]

>

> ________________________________________________________________________

> ________________________________________________________________________

>

> Message: 4

> Date: Thu, 4 Mar 2004 20:13:03 -0800 (PST)

> From: Bob Harris <bharriscar@prodigy.net>

> Subject: Jay Leno

>

> Hey Hudsoners, Did anyone happen to catch Jay Leno saying his favorite car is a Hudson ? I think it was on the American Chopper TV show when they delivered a custom chopper to him, someone asked what his favorite car was and he said, I think, a 50's Hudson. He said Hudson for sure and I think he said 50's. They didn't dwell on it, they went on to show him taking the American Chopper Father and Son on a ride in an antique firetruck. Jay Leno can have any car he wants and has a bunch of classics including some Duesenberg's ! Bob H.

> For the overseas folks, "American Chopper" is an American TV show which shows the day to day operations of a Company run by a Father and two Sons. They build Harley style motorcycles and they build some wild themed bikes. To make it more interesting, the Father and one Son in particular, don't get along very well. Tools get thrown and a lot of hollering goes on. They made a stylized chopper resembling an old European looking bike and gave it to Jay Leno, a late night talk show host and comedian. B-

>

> [This message contained attachments]

>

> ________________________________________________________________________

> ________________________________________________________________________

>

> Community email addresses:

> Post message: HudsonSuperSix16-29@onelist.com

> Subscribe: HudsonSuperSix16-29-subscribe@onelist.com

> Unsubscribe: HudsonSuperSix16-29-unsubscribe@onelist.com

> List owner: HudsonSuperSix16-29-owner@onelist.com

>

> Shortcut URL to this page:

> http://www.onelist.com/community/HudsonSuperSix16-29

> ------------------------------------------------------------------------

> Yahoo! Groups Links

>

>

>

>

> ------------------------------------------------------------------------
This discussion has been closed.