Re: [HSS] Puller

Attachments :







    The wheel pullers are the  same for all Hudson
    and Essex sixes, up to 1928 and the Essex for '29.  I have a sample which I
    could use as a pattern if anyone wants one.  Let me know and I'll see about
    getting them done.  As Martyn says, once the lathe is set up, it's probably
    easier to run off a batch.

    Geoff.

    ----- Original Message -----



    Sent: Wednesday, June 16, 2004 10:47
    PM

    Subject: [HSS] Puller


    If anyone has a dimensional drawing of these, assuming they are
    all the same!  I can price up machining some up out of a lump of steel
    for anyone in need. Once set up it would be cheaper to make a
    few.

    Martyn Hudson
    1913 Hudson 37
    1920 Hudson Super Six Model
    O

    At 11:52 15/06/04 -0400, you wrote:

    In a
    message dated 6/14/04 11:37:00 PM, hudson@unette.co.uk
    writes:



    My HSS 1920 has a live axle so
    the wheels just float on the axle case, I guess yours are on splined or
    tapered half shafts? If so do u need a knave puller that screws into the
    hub thread and the a drive bolt in the
    centre?
         You are quite correct,
    these are not complicated. The tool is just a cast iron cap that screws onto
    the hubcap thread and has a screw in the crown to force the hub off the
    taper. There are some plans afoot to maybe get a few of these made up, but
    nothing definite yet.



    Paul O'Neil
    SoCal
    1926 Hudson
    Anderson Coupe
    1929 Hudson Town Sedan
    1939 Cadillac Coupe (How'd that
    get in here?)

    www.cichet.us
    www.aeromark.net


    Community email addresses:
      Post
    message: HudsonSuperSix16-29@onelist.com
     
    Subscribe:   
    HudsonSuperSix16-29-subscribe@onelist.com
      Unsubscribe: 
    HudsonSuperSix16-29-unsubscribe@onelist.com
      List
    owner:   HudsonSuperSix16-29-owner@onelist.com

    Shortcut URL
    to this page:
      http://www.onelist.com/community/HudsonSuperSix16-29



    Yahoo! Groups Sponsor
    ADVERTISEMENT
    40c755f.jpg
    40c75f6.jpg



    Yahoo! Groups Links

    To visit your group on the web, go to:
    http://groups.yahoo.com/group/HudsonSuperSix16-29/


    To unsubscribe from this group, send an email to:
    HudsonSuperSix16-29-unsubscribe@yahoogroups.com


    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

    --
    This message has been scanned for
    viruses and
    dangerous content by IC-MailScanner, and is

    believed to be clean.

    For queries or information please
    contact:-

    =================================
    Internet Central
    Technical Support

    http://www.internet-central.net

    =================================


    Community email addresses:
      Post
    message: HudsonSuperSix16-29@onelist.com
     
    Subscribe:   
    HudsonSuperSix16-29-subscribe@onelist.com
      Unsubscribe: 
    HudsonSuperSix16-29-unsubscribe@onelist.com
      List owner:  
    HudsonSuperSix16-29-owner@onelist.com

    Shortcut URL to this
    page:
      http://www.onelist.com/community/HudsonSuperSix16-29





    This discussion has been closed.