Re: [HSS] Crankcase oil slinger

Unknown

I haven't done itmyself, but know of several owners who have machined out

the original seal retainer recess in the housing and installed a modern seal

in it's place. Pretty easy piece of machining for a competent machine shop.

Geoff.

----- Original Message -----

From: "yelhudson" <fdepasq@cs.com>

To: <HudsonSuperSix16-29@yahoogroups.com>

Sent: Friday, October 29, 2004 1:32 PM

Subject: [HSS] Crankcase oil slinger









When I took my 17 SS engine apart the oil slinger/spacer, that fits

on the crankshaft in the timing cover, was damaged. It has two

slinger ridges and one of them was completely gone. This part rides

against a felt gasket in the timing cover. Does anyone have

experience replacing this with a modern part? Dave Kostansek thinks

a new one will have to be made. Thought I would open it up for

discussion to see if any one else has had this porblem.



Frank DePasquale

New York













Community email addresses:

Post message: HudsonSuperSix16-29@onelist.com

Subscribe: HudsonSuperSix16-29-subscribe@onelist.com

Unsubscribe: HudsonSuperSix16-29-unsubscribe@onelist.com

List owner: HudsonSuperSix16-29-owner@onelist.com



Shortcut URL to this page:

http://www.onelist.com/community/HudsonSuperSix16-29

Yahoo! Groups Links