Re: [HSS] Fw: Parts needed - a shameless plug
Alex the valance panels which go between the body
mounts and the chassis are pretty easy to get made up. I can send
you the dimensions if you need them. Any good sheet metal worker should
able to do these for you. I actually have a spare pair here, but I think
the cost of sending them from N.Z. to U.S. would be much more than they
are worth!
mounts and the chassis are pretty easy to get made up. I can send
you the dimensions if you need them. Any good sheet metal worker should
able to do these for you. I actually have a spare pair here, but I think
the cost of sending them from N.Z. to U.S. would be much more than they
are worth!
Geoff.
----- Original Message -----
Sent: Tuesday, June 07, 2005 12:14
PM
PM
Subject: [HSS] Fw: Parts needed - a
shameless plug
shameless plug
----- Original Message -----
From: Alex J. Jones
Sent: Monday, June 06, 2005 7:10 PM
Subject: Parts needed - a shameless plug
Just thought I would resend this as the meet is just a
few days away. Anyone who is going and might have some parts - let me know.
Thanks to both lists for very good information and leads. Alex
Jones
few days away. Anyone who is going and might have some parts - let me know.
Thanks to both lists for very good information and leads. Alex
Jones
I plan on attending the following meet and am hoping to
connect with a member(s) willing to part with any or all of the following for
my '29 Essex 2dr coupe w/ RS:
connect with a member(s) willing to part with any or all of the following for
my '29 Essex 2dr coupe w/ RS:
Right and left front fenders, cowl w/or w/o vent, hinged
hood w/clamps, running boards and corresponding aprons that fit from the
bottom of the doors to the running boards. I also need the decorative
instrument gauge frame - I think I have the gauges necessary to equip it -
correction still need gauges as '31 does not all fit '30. One final item, a
windshield frame for a '30 convertible coupe. Please advise this greedy old
car nut if you have available any of the above. Thanks to all, Alex Jones email = thistle@fgi.net
hood w/clamps, running boards and corresponding aprons that fit from the
bottom of the doors to the running boards. I also need the decorative
instrument gauge frame - I think I have the gauges necessary to equip it -
correction still need gauges as '31 does not all fit '30. One final item, a
windshield frame for a '30 convertible coupe. Please advise this greedy old
car nut if you have available any of the above. Thanks to all, Alex Jones email = thistle@fgi.net
CENTRAL REGIONAL
MEET
MEET
Illinois |
Collinsville, IL |
Thu, June 09 - Sat, June 11 2005 |
Central Regional Meet |
Honoring the Hudson Italia. Host hotel-Holiday Inn,1-800-551-5133 (10 minutes east of |
downtown STL) $82.95 includes breakfast. Saturday Banquet w/ Professional |
Entertainment and several tours are planned. Hosted By The Gateway Chapter |
Contact: Richard Burgdorf Phone (636) 942-2500 Email rpburgdorf@sprintmail.com |
Community email
addresses:
Post message: HudsonSuperSix16-29@onelist.com
Subscribe:
HudsonSuperSix16-29-subscribe@onelist.com
Unsubscribe:
HudsonSuperSix16-29-unsubscribe@onelist.com
List owner:
HudsonSuperSix16-29-owner@onelist.com
Shortcut URL to this
page:
http://www.onelist.com/community/HudsonSuperSix16-29
0
This discussion has been closed.
Categories
- 36.8K All Categories
- 99 Hudson 1916 - 1929
- 15 Upcoming Events
- 85 Essex Super 6
- 28.5K HUDSON
- 541 "How To" - Skills, mechanical and other wise
- 992 Street Rods
- 150 American Motors
- 171 The Flathead Forum
- 49 Manuals, etc,.
- 73 Hudson 8
- 43 FORUM - Instructions and Tips on using the forum
- 2.8K CLASSIFIEDS
- 597 Vehicles
- 2.1K Parts & Pieces
- 76 Literature & Memorabilia
- Hudson 1916 - 1929 Yahoo Groups Archived Photos