FW: [HSS] Re: 29 F Block on EBay

Unknown

Hi Aaron,

Well I have almost 3 complete 1928 and 29 Essex rumble seat coupes off to Matt Hobbs for Stripping. Matt will be removing all paint and Rust and then etch priming them before we begin re assembly and preparing for sale.

 

Ken

 

From: HudsonSuperSix16-29@yahoogroups.com [mailto:HudsonSuperSix16-29@yahoogroups.com] On Behalf Of bighudsonnut
Sent: Tuesday, July 09, 2013 7:36 PM
To: HudsonSuperSix16-29@yahoogroups.com
Subject: [HSS] Re: 29 F Block on Ebay

 

 

This our own Ken Ferguson who has been on here. He decided to sell all his 29 stuff. He also has a bunch of early essex stuff. He is in Nevada, Iowa. Sad to hear.

Aaron

--- In HudsonSuperSix16-29@yahoogroups.com, forjack842@... wrote:
>
>
> Found this if anyone's interested. Too far from me.
> Jack
> http://www.ebay.com/itm/190867097933?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
>
>
>
>
>
>
> -----Original Message-----
> From: Karl Hamson <karlh@...>
> To: HudsonSuperSix16-29 <HudsonSuperSix16-29@yahoogroups.com>
> Sent: Mon, Jul 8, 2013 12:58 pm
> Subject: Re: [HSS] Super 6 Block Removal
>
>
>
>
>
>
>
> I think that would be a very good way to bend a rod or two, break rings, etc. I have done it with an E4 engine but I just wanted it together for storage. I would take the extra couple of hours and do as Gene said if you do not want to take the crankcase out of the car.
> Karl
>
> ----- Original Message -----
>
> From: Robert Frankcom
>
> To: hudsonsupersix16-29@yahoogroups.com
>
> Sent: Monday, July 08, 2013 10:39 AM
>
> Subject: RE: [HSS] Super 6 Block Removal
>
>
>
>
>
>
> It would be great to hear from anyone who has successfully removed the cylinder block from the crankcase, whilst it is still installed in the chassis, and successfully got it back on again without messing up the pistons.
> What is one advised to do to minimize problems?
>
> I suspect the top surface of the block needs skimming, having done the head twice now, but am still getting water in number 4 and 5 combustion chambers, and gas in the coolant when the engine is running.
>
> Thanks, Robert
>
>
>
> To: HudsonSuperSix16-29@yahoogroups.com
> From: karlh@...
> Date: Thu, 30 May 2013 20:48:25 -0700
> Subject: Re: [HSS] K Gap
>
>
>
>
>
>
> Does anyone have contact information for these folks? Are they still in business? I need some rubber door bumpers, etc for our 28 coupe but have heard from Geoff that they are not very reliable.
>
>
>
> Thanks
>
> Karl
>