Re: 28 Essex

Unknown
Unknown
in Hudson 1916 - 1929
Attachments :
      28 Essex.JPG





    Hi Folks

    We picked up this Essex last week. 
    Restoration was done in the mid 80s but never completed.  The gentleman
    passed away and the car wound up with his son who was not interested in
    it.  Upholstery is all done and the motor was rebuilt by a fellow in
    Puyalup Washington.  I was able to drive it onto the trailer. Wheels were
    terribly loose but fortunately I had a pretty decent set in the shed. 
    Brakes were all relined but not installed on the rear.

     

     

    We need a few bits:

    Front splash apron

    Steering wheel and control levers.  Geoff
    looks like we need another steering wheel hub.

    Rear frame crossmember complete.  This one is
    home made and the spring perches do not line up properly

    29 fuel gauge sending unit and fuel pick up
    connection.

    Gas tank mount straps.

     

    I am sure there will be more.  Question: 
    where does the temperature gauge sending unit go on the motor.  I can see
    no place to put it.

     

    Thanks

    Karl

     

    ----- Original Message -----



    Sent: Friday, August 22, 2014 3:50
    PM

    Subject: RE: [HSS] Alex Burrs
    manuals


     



     

    David Young

     




    From: HudsonSuperSix16-29@yahoogroups.com
    [mailto:HudsonSuperSix16-29@yahoogroups.com]
    Sent: Saturday, 23
    August 2014 7:21 a.m.
    To: HudsonSuperSix16-29@yahoogroups.com
    Subject:
    Re: [HSS] Alex Burrs manuals


     


    .Hi  I am needing to dismantle an American Bosch Distributor to
    convert it from 6 to 4 cylinder.  I have no information on these and hope
    that Alex may have posted something.  However I cannot find the link to
    the publications Alex has put on line.

     

    Thanks

    Karl
    image
    image

    This discussion has been closed.

    Categories