Fw: Super Six flathead cylinder (old race car)

Unknown

Attachments :

HUDSONMOTORIZQ.jpg

HudsonHist.doc

HUDMOTIZQ.jpg

HUDMOTDER.jpg

Here are some more photos and a history. Helps if you can read Spanish but

google can give you a pretty good translation.



Karl

----- Original Message -----

From: "Pablo Alvarez" <conta@aea-sa.com.ar>

To: <karlh@shaw.ca>

Sent: Wednesday, November 28, 2007 7:41 AM

Subject: RV: Super Six flathead cylinder





Hi Karl

Nice to meet you,Where are you from?

You are a restaured or coleccionist of hudsons or other cars

I have motorcycles too

This car runs in Argentina in the 20th, attached a file whit the history and

some photograph of the engine , do you have one heads cylinder? What about

to get one for me.

Thanks

Regards

Pablo



-----Mensaje original-----

De: Karl Hamson [mailto:hameng@shaw.ca]

Enviado el: Martes, 27 de Noviembre de 2007 05:07 p.m.

Para: Pablo Alvarez

Asunto: RE: Super Six flathead cylinder



Hi Pablo

I love that car!!! Would like to know more about it. How about some photos

of the engine on bothe sides? I have a spare cylinder head and think it is

ok but should have it tested to make sure. These heads should be readily

available because they will interchange from 1916 to 1926.



My home email is karlh@shaw.ca



Regards

Karl



-----Original Message-----

From: Pablo Alvarez [mailto:conta@aea-sa.com.ar]

Sent: Tuesday, November 27, 2007 11:01 AM

To: 'Karl Hamson'

Subject: RE: Super Six flathead cylinder





Hello Karl, my nome is Pablo ,I am from Argentina ,sorry for my english, i

have a problem , I restaured one Hudson Special Super Six 1920 and the head

cylinder is broken , if you can help me send some info about how can I find

one old or new. Attached a photograph. Thank you very much.

Pablo



-----Mensaje original-----

De: Karl Hamson [mailto:hameng@shaw.ca]

Enviado el: Lunes, 26 de Noviembre de 2007 06:09 p.m.

Para: conta@aea-sa.com.ar

Asunto: Re: Super Six flathead cylinder



Hello, you may have the best luck on the Hudson 1916/29 forum. If you

google that it will come up with the correct address. They are a good bunch

of people and very helpful. If you have no luck finding the site get back

to me and I will give you the exact address. I have a cylinder head for a

1926 which will probably fit but will not have the holes for the priming

cups.



Regards

Karl Hamson



Hamson Engineering

PO Box 128

Pender Island BC

V0N 2M0

250.629.6119

http://www.hamsonengineering.com

No virus found in this outgoing message.

Checked by AVG Free Edition.

Version: 7.5.503 / Virus Database: 269.16.7/1152 - Release Date: 11/26/2007

10:50 AM



__________ Informaci