1946 super sedan rear sway bar axle mount

engr1962
engr1962 Member
in HUDSON

I have discovered that the rear sway bar mount that is welded on the rear axle is basically broken off, so need to figure out something to fix it.

First thought is to make some kind of replacement flange and weld it on

Second thought it to make a flange and use 2 big u-bolts and attach it to the axle that way.

Any thoughts? Has anyone else had this break off? How much stress is it under normally?


Thanks!

dan

Comments

  • paulrhd29nz
    paulrhd29nz Member

    Your sway bar has been added. From factory had a lug welded on the dif so the sway bar bolted on with rubber bushings

  • engr1962
    engr1962 Member
    20240717_175509.jpg

    This is a picture of the bracket with the bar next to it. It looks pretty origjnal but it just cracked off.

  • 54coupe
    54coupe Member

    When I put the Ford 9" rear in my '40, I made a bracket and welded it on.

  • paulrhd29nz
    paulrhd29nz Member

    I see your dilemma. U bolts may work as a short term fix, until you can get the bracket fixed.

Categories

In this Discussion