51 Fuel Tank Sending Unit?

Unknown
Unknown
edited November -1 in HUDSON
Is there a replacement available for the fuel tank sending unit for a 51? I read somewhere that a 36-54 Ford Unit would work if I had the right Ohms for the gauge (I am also converting to 12volt). Any information would be greatly appreciated.

Comments

  • Club Coupe
    Club Coupe Expert Adviser
    The Ford truck unit #01A-9275 is what you need. The arm will have to be bent slightly. Works with either 6 or 12 volt. Available from Ford dealers, Dennis Carpenter, most good parts stores, etc. Also available from Stewart-Warner.
  • Park_W
    Park_W Senior Contributor
    To convert your gauges for 12v, just replace the original instrument voltage regulator (behind the dash cluster) with NAPA/Echlin IR-2. It's listed for the earlier 12v Fords, around '56-62, I think.
  • Unknown
    Unknown
    Have replacement fuel senders, at 65.00 work on 6 or 12 volt, add 5.00 shipping ALBRIGHTS VINTAGE COACH, 16593 ARROW BL, FONTANA, CA 92335
This discussion has been closed.

Categories

In this Discussion