1947 and older water jacket NOS

bent metal
bent metal Senior Contributor
edited November -1 in HUDSON
I have a new old stock water jacket for '47 and older Hudson sixes for sale on e-bay. If anyone is interested, I think it's at $15. right now. I'm not sure how far back this one fits. But I think the mid thirties or so. If yours is questionable now might be a good time to replace it, before the Nationals.:) Here's the "e-bay" link below.



http://cgi.ebay.com/ebaymotors/1947-and-older-Hudson-6-splasher-water-jacket-NOS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem150331050649QQitemZ150331050649QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories



Some one else even has the new gaskets for sale too.

Comments

  • tigermoth
    tigermoth Expert Adviser
    fits '36 and on. regards, tom
  • bent metal
    bent metal Senior Contributor
    edited November 2013
    Now, if you want a stainless steel one of these, the Railton Club in the UK offers them -

    http://www.railton.org/index.htm
    Look under "Spares" -

    - 110 British Pounds for the 'Water Jacket', plus shipping

    - 36+ British Pounds for a year's club membership (required to purchase)

    Will probably polish up real nice...

    How much is that in US dollars? Also, does anyone have a picture of a stainless one? Or of the stainless water outlets they sell, like for 29's?
  • junkcarfann
    junkcarfann Expert Adviser
    $151.00 US dollars, according to this Currency Conversion site:



    http://www.xe.com/ucc/
  • barrysweet52
    barrysweet52 Expert Adviser
    I have just a had a few 6 cyl jackets made out of stainless for Hudson owners here in Aust. They cost $160 each. Imagine a 4mm thick large rectangular plate with laser cut holes for the water flow and for the stud holes. I then had a stainless "box" welded onto it with a piece of stainless exhaust pipe for the water outlet. A very professional good looking end result. Im now working on something similar for the st 8s. Anyone wanting one might like to conside doing the same. Regards, Barry.
  • bent metal
    bent metal Senior Contributor
    barrysweet52 wrote:
    I have just a had a few 6 cyl jackets made out of stainless for Hudson owners here in Aust. They cost $160 each. Imagine a 4mm thick large rectangular plate with laser cut holes for the water flow and for the stud holes. I then had a stainless "box" welded onto it with a piece of stainless exhaust pipe for the water outlet. A very professional good looking end result. Im now working on something similar for the st 8s. Anyone wanting one might like to conside doing the same. Regards, Barry.



    It sounds nice, do you have a picture?
  • VicTor Z
    VicTor Z Senior Contributor
    Hello Bent M., didn't Buzz S. from the San Deigo area have some made and did some improvements on them?
  • oldhudsons
    oldhudsons Senior Contributor
    come to Pontiac & I'll sell you an NOS 8 for $150 - use the same stuff they use in gas tanks on it & it'll last forever, won't need stainless. (Don't remember if I have any NOS splasher 6 ones or not, know I have some used ones).
  • oldhudsons
    oldhudsons Senior Contributor
    just "show me da' money" = no taxes, no shipping, can "eyeball" the product before you buy it, LOL!

    Have several from the mid-30's too.

Categories

In this Discussion