center steering pin/bushing
MissScarlett
Member
in HUDSON
My 51 Pacemaker center steering needs rebuild/replace. Tire tearing toe in is not present. What are sources/suggestions for bearing, parts, bushings? I was told specifically of "oil lite" bronze bushings.
0
Comments
-
0
-
Many times you only need the bushings.
http://openforum.hetclub.org/discussion/166936/bushing-for-center-point-stg-1948-54#latest
If you have to have a new center pin, it will need to be drilled for the tapered lock pin.
I take mine to a local machine shop when I need this done.
Also you may only need the pin properly shimmed to take care of the play.
0 -
New center pin & bushing installed, unable to find means to adjust driver's side camber. What am I missing?0
-
Here is a link to a picture of the camber adjustment;
It is easy to see if you remove the wheel.
Loosen the lock nut, and turn the eccentric bushing to adjust camber.
Rob
0
This discussion has been closed.
Categories
- 36.6K All Categories
- 86 Hudson 1916 - 1929
- 11 Upcoming Events
- 74 Essex Super 6
- 28.4K HUDSON
- 513 "How To" - Skills, mechanical and other wise
- 990 Street Rods
- 150 American Motors
- 170 The Flathead Forum
- 47 Manuals, etc,.
- 72 Hudson 8
- 40 FORUM - Instructions and Tips on using the forum
- 2.7K CLASSIFIEDS
- 593 Vehicles
- 2.1K Parts & Pieces
- 76 Literature & Memorabilia
- Hudson 1916 - 1929 Yahoo Groups Archived Photos