Channel for 49 VENT Window frame?

Unknown
edited November -1 in HUDSON
What window setting channel have you all used for the VENT WINDOW GLASS? I am talking about the channel that goes into the chrome frame which holds the vent glass in. I have K-Gap's #218 channel (same stuff I used for top and sides of the side glass), ...but looking at it I am going to be hard pressed getting that in there....seems way too big. I have all the other stuff I need, this is the only thing holding me up.



Is there something else you guys have used? I emailed K-Gap but they are gone to Sept.



Any thoughts????



Thanks so much.



Dennis

Comments

  • I use the black vinyl electrical tape. Put a few strips on untill the glass goes in tight.
  • What window setting channel have you all used for the VENT WINDOW GLASS? I am talking about the channel that goes into the chrome frame which holds the vent glass in. I have K-Gap's #218 channel (same stuff I used for top and sides of the side glass), ...but looking at it I am going to be hard pressed getting that in there....seems way too big. I have all the other stuff I need, this is the only thing holding me up.



    Is there something else you guys have used? I emailed K-Gap but they are gone to Sept.



    Any thoughts????





    Thanks so much.



    Dennis



    Dennis... Restoration Specialists... JC Whitney. I got the stuff I use at least 10 years ago from JC whitney... get the narrow channel cloth covered and it will press fit into the frame. I used a piece of wood the thickness of the window glass to set the channel into the frame ... used no glue. I know that good glass shops will have channel and can order any of the different OEM old stock replacement stuff.



    Good Luck
  • SuperDave
    SuperDave Senior Contributor
    What window setting channel have you all used for the VENT WINDOW GLASS? I am talking about the channel that goes into the chrome frame which holds the vent glass in. I have K-Gap's #218 channel (same stuff I used for top and sides of the side glass), ...but looking at it I am going to be hard pressed getting that in there....seems way too big. I have all the other stuff I need, this is the only thing holding me up.



    Is there something else you guys have used? I emailed K-Gap but they are gone to Sept.



    Any thoughts????



    Thanks so much.Dennis,

    Dennis, Your local automotive glass shop should have the glass setting channel you need. it is a rubberized cloth strip that is folded over the glass. the glass and setting channel is forced into the chrome frame using a mallet.(Carefully !) In the absense of that, several layers of the old type Friction Tape will work. A razor blade removes the excess. Hope this helps,

    Dave W. Fl
  • PAULARGETYPE
    PAULARGETYPE Senior Contributor
    My Glass Guy Had The Stuff In Stock He Installed The Glass In The Frames While He Cut The Glass And It Was Cheep
This discussion has been closed.