Coupe door parts needed

Unknown
Unknown
edited November -1 in HUDSON
Working on a new project...'51 C8 Coupe. Somewhere along the way, somebody disassembled the driver's door and the parts got separated from the car. I need the interior window frame, the metal trim panel that is at the top of the door panels and a window regulator (not the vent window regulator). Thanks everybody!

Comments

  • Unknown
    Unknown
    tristansdaz wrote:
    Working on a new project...'51 C8 Coupe. Somewhere along the way, somebody disassembled the driver's door and the parts got separated from the car. I need the interior window frame, the metal trim panel that is at the top of the door panels and a window regulator (not the vent window regulator). Thanks everybody!

    Sent you a PM.

    No Parts, unless a sedan regulator will work, I need other info.
  • [Deleted User]
    [Deleted User]
    tristansdaz wrote:
    Working on a new project...'51 C8 Coupe. Somewhere along the way, somebody disassembled the driver's door and the parts got separated from the car. I need the interior window frame, the metal trim panel that is at the top of the door panels and a window regulator (not the vent window regulator). Thanks everybody!
    Are you referring to the 1 inch stainless trim on the door panel top?? Walt.
  • Unknown
    Unknown
    walt's garage-53 wrote:
    Are you referring to the 1 inch stainless trim on the door panel top?? Walt.



    No, this is the 4" piece of metal just below the window frame that is simulated woodgrain on the Hornets and Commodores. Thanks.
  • [Deleted User]
    [Deleted User]
    Try these folks. Fast friendly service:



    Large stock of NOS and Used Hudson Parts: Ken Amman, 240 Raleigh Pl., Lennon, MI 48449 (810) 621-3665. NOS and used parts and some cars for sale.



    e-mail:



    kamman@power-net.net
  • 53jetman
    53jetman Senior Contributor
    Ken Amman sold out to Bill & Charlies Antique Auto, 10917 Commercial St., Richmond IL 60071 - Phone (815) 678-AUTO & fax (815) 678-7776



    Jerry

    53jetman
  • RL Chilton
    RL Chilton Administrator, Member
    I've got a trim panel that you need. Just the driver door or a whole set?
  • Unknown
    Unknown
    RL Chilton wrote:
    I've got a trim panel that you need. Just the driver door or a whole set?



    Hudzilla says that he has the parts I need, have been in contact. However, if he doesn't have the correct upper trim panel (valance?), I'll be in contact. I only need the one for the driver's door. Thanks for your reply.



    Larry
  • duncan
    duncan Expert Adviser
    I am looking for 2 plates that hold the shafts and bearings clamped together with a countersunk stovebolt for a 54 Hornet Hollywood side window. Merry Christmas and Happy New Year

    Thanks for everybodys help this past year . duncan
This discussion has been closed.

Categories

In this Discussion